From 3884b47b7c255c2e94d9b387ee83c7e8bb981258 Mon Sep 17 00:00:00 2001 From: Matt Caswell Date: Tue, 5 Jul 2016 12:04:37 +0100 Subject: [PATCH] Fix DTLS replay protection The DTLS implementation provides some protection against replay attacks in accordance with RFC6347 section 4.1.2.6. A sliding "window" of valid record sequence numbers is maintained with the "right" hand edge of the window set to the highest sequence number we have received so far. Records that arrive that are off the "left" hand edge of the window are rejected. Records within the window are checked against a list of records received so far. If we already received it then we also reject the new record. If we have not already received the record, or the sequence number is off the right hand edge of the window then we verify the MAC of the record. If MAC verification fails then we discard the record. Otherwise we mark the record as received. If the sequence number was off the right hand edge of the window, then we slide the window along so that the right hand edge is in line with the newly received sequence number. Records may arrive for future epochs, i.e. a record from after a CCS being sent, can arrive before the CCS does if the packets get re-ordered. As we have not yet received the CCS we are not yet in a position to decrypt or validate the MAC of those records. OpenSSL places those records on an unprocessed records queue. It additionally updates the window immediately, even though we have not yet verified the MAC. This will only occur if currently in a handshake/renegotiation. This could be exploited by an attacker by sending a record for the next epoch (which does not have to decrypt or have a valid MAC), with a very large sequence number. This means the right hand edge of the window is moved very far to the right, and all subsequent legitimate packets are dropped causing a denial of service. A similar effect can be achieved during the initial handshake. In this case there is no MAC key negotiated yet. Therefore an attacker can send a message for the current epoch with a very large sequence number. The code will process the record as normal. If the hanshake message sequence number (as opposed to the record sequence number that we have been talking about so far) is in the future then the injected message is bufferred to be handled later, but the window is still updated. Therefore all subsequent legitimate handshake records are dropped. This aspect is not considered a security issue because there are many ways for an attacker to disrupt the initial handshake and prevent it from completing successfully (e.g. injection of a handshake message will cause the Finished MAC to fail and the handshake to be aborted). This issue comes about as a result of trying to do replay protection, but having no integrity mechanism in place yet. Does it even make sense to have replay protection in epoch 0? That issue isn't addressed here though. This addressed an OCAP Audit issue. CVE-2016-2181 Upstream-Status: Backport CVE: CVE-2016-2181 patch2 Signed-off-by: Armin Kuster Reviewed-by: Richard Levitte --- ssl/d1_pkt.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++------------ ssl/ssl.h | 1 + ssl/ssl_err.c | 4 +++- 3 files changed, 52 insertions(+), 13 deletions(-) Index: openssl-1.0.2h/ssl/d1_pkt.c =================================================================== --- openssl-1.0.2h.orig/ssl/d1_pkt.c +++ openssl-1.0.2h/ssl/d1_pkt.c @@ -194,7 +194,7 @@ static int dtls1_record_needs_buffering( #endif static int dtls1_buffer_record(SSL *s, record_pqueue *q, unsigned char *priority); -static int dtls1_process_record(SSL *s); +static int dtls1_process_record(SSL *s, DTLS1_BITMAP *bitmap); /* copy buffered record into SSL structure */ static int dtls1_copy_record(SSL *s, pitem *item) @@ -320,13 +320,18 @@ static int dtls1_process_buffered_record { pitem *item; SSL3_BUFFER *rb; + SSL3_RECORD *rr; + DTLS1_BITMAP *bitmap; + unsigned int is_next_epoch; + int replayok = 1; item = pqueue_peek(s->d1->unprocessed_rcds.q); if (item) { /* Check if epoch is current. */ if (s->d1->unprocessed_rcds.epoch != s->d1->r_epoch) - return (1); /* Nothing to do. */ + return 1; /* Nothing to do. */ + rr = &s->s3->rrec; rb = &s->s3->rbuf; if (rb->left > 0) { @@ -343,11 +348,41 @@ static int dtls1_process_buffered_record /* Process all the records. */ while (pqueue_peek(s->d1->unprocessed_rcds.q)) { dtls1_get_unprocessed_record(s); - if (!dtls1_process_record(s)) - return (0); + bitmap = dtls1_get_bitmap(s, rr, &is_next_epoch); + if (bitmap == NULL) { + /* + * Should not happen. This will only ever be NULL when the + * current record is from a different epoch. But that cannot + * be the case because we already checked the epoch above + */ + SSLerr(SSL_F_DTLS1_PROCESS_BUFFERED_RECORDS, + ERR_R_INTERNAL_ERROR); + return 0; + } +#ifndef OPENSSL_NO_SCTP + /* Only do replay check if no SCTP bio */ + if (!BIO_dgram_is_sctp(SSL_get_rbio(s))) +#endif + { + /* + * Check whether this is a repeat, or aged record. We did this + * check once already when we first received the record - but + * we might have updated the window since then due to + * records we subsequently processed. + */ + replayok = dtls1_record_replay_check(s, bitmap); + } + + if (!replayok || !dtls1_process_record(s, bitmap)) { + /* dump this record */ + rr->length = 0; + s->packet_length = 0; + continue; + } + if (dtls1_buffer_record(s, &(s->d1->processed_rcds), s->s3->rrec.seq_num) < 0) - return -1; + return 0; } } @@ -358,7 +393,7 @@ static int dtls1_process_buffered_record s->d1->processed_rcds.epoch = s->d1->r_epoch; s->d1->unprocessed_rcds.epoch = s->d1->r_epoch + 1; - return (1); + return 1; } #if 0 @@ -405,7 +440,7 @@ static int dtls1_get_buffered_record(SSL #endif -static int dtls1_process_record(SSL *s) +static int dtls1_process_record(SSL *s, DTLS1_BITMAP *bitmap) { int i, al; int enc_err; @@ -565,6 +600,10 @@ static int dtls1_process_record(SSL *s) /* we have pulled in a full packet so zero things */ s->packet_length = 0; + + /* Mark receipt of record. */ + dtls1_record_bitmap_update(s, bitmap); + return (1); f_err: @@ -600,7 +639,7 @@ int dtls1_get_record(SSL *s) * The epoch may have changed. If so, process all the pending records. * This is a non-blocking operation. */ - if (dtls1_process_buffered_records(s) < 0) + if (!dtls1_process_buffered_records(s)) return -1; /* if we're renegotiating, then there may be buffered records */ @@ -735,20 +774,17 @@ int dtls1_get_record(SSL *s) if (dtls1_buffer_record (s, &(s->d1->unprocessed_rcds), rr->seq_num) < 0) return -1; - /* Mark receipt of record. */ - dtls1_record_bitmap_update(s, bitmap); } rr->length = 0; s->packet_length = 0; goto again; } - if (!dtls1_process_record(s)) { + if (!dtls1_process_record(s, bitmap)) { rr->length = 0; s->packet_length = 0; /* dump this record */ goto again; /* get another record */ } - dtls1_record_bitmap_update(s, bitmap); /* Mark receipt of record. */ return (1); Index: openssl-1.0.2h/ssl/ssl.h =================================================================== --- openssl-1.0.2h.orig/ssl/ssl.h +++ openssl-1.0.2h/ssl/ssl.h @@ -2623,6 +2623,7 @@ void ERR_load_SSL_strings(void); # define SSL_F_DTLS1_HEARTBEAT 305 # define SSL_F_DTLS1_OUTPUT_CERT_CHAIN 255 # define SSL_F_DTLS1_PREPROCESS_FRAGMENT 288 +# define SSL_F_DTLS1_PROCESS_BUFFERED_RECORDS 404 # define SSL_F_DTLS1_PROCESS_OUT_OF_SEQ_MESSAGE 256 # define SSL_F_DTLS1_PROCESS_RECORD 257 # define SSL_F_DTLS1_READ_BYTES 258 Index: openssl-1.0.2h/ssl/ssl_err.c =================================================================== --- openssl-1.0.2h.orig/ssl/ssl_err.c +++ openssl-1.0.2h/ssl/ssl_err.c @@ -1,6 +1,6 @@ /* ssl/ssl_err.c */ /* ==================================================================== - * Copyright (c) 1999-2015 The OpenSSL Project. All rights reserved. + * Copyright (c) 1999-2016 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -93,6 +93,8 @@ static ERR_STRING_DATA SSL_str_functs[] {ERR_FUNC(SSL_F_DTLS1_HEARTBEAT), "dtls1_heartbeat"}, {ERR_FUNC(SSL_F_DTLS1_OUTPUT_CERT_CHAIN), "dtls1_output_cert_chain"}, {ERR_FUNC(SSL_F_DTLS1_PREPROCESS_FRAGMENT), "DTLS1_PREPROCESS_FRAGMENT"}, + {ERR_FUNC(SSL_F_DTLS1_PROCESS_BUFFERED_RECORDS), + "DTLS1_PROCESS_BUFFERED_RECORDS"}, {ERR_FUNC(SSL_F_DTLS1_PROCESS_OUT_OF_SEQ_MESSAGE), "DTLS1_PROCESS_OUT_OF_SEQ_MESSAGE"}, {ERR_FUNC(SSL_F_DTLS1_PROCESS_RECORD), "DTLS1_PROCESS_RECORD"},