2016-01-04  Mike Frysinger  <vapier@gentoo.org>

	* asm/opterr1.ms: Update expected output.
	* asm/opterr2.ms: Likewise.

2015-12-25  Mike Frysinger  <vapier@gentoo.org>

	* asm/io1.ms: Update expected output.

2015-12-25  Mike Frysinger  <vapier@gentoo.org>

	* hw/rv-n-cris/rvc.exp (rvdummy): Set up sane default.

2012-03-24  Mike Frysinger  <vapier@gentoo.org>

	* c/clone5.c: Update output to ignore decoded signal string.
	* c/fcntl1.c, c/kill2.c, c/kill3.c, c/mprotect1.c, c/pipe5.c,
	c/readlink5.c, c/rtsigprocmask1.c, c/rtsigsuspend1.c, c/sig10.c,
	c/sig11.c, c/sig3.c, c/sig4.c, c/sig5.c, c/sig6.c, c/sig7.c,
	c/sig8.c, c/sigreturn1.c, c/sigreturn2.c, c/syscall1.c,
	c/syscall2.c, c/syscall3.c, c/syscall4.c, c/sysctl2.c: Likewise.

2012-03-21  Mike Frysinger  <vapier@gentoo.org>

	* asm/addqpc.ms: Update output to ignore decoded signal string.
	* asm/boundmv32.ms, asm/fidxd.ms, asm/fidxi.ms, asm/ftagd.ms,
	asm/ftagi.ms, asm/halt.ms, asm/io6.ms, asm/io7.ms, asm/io8.ms,
	asm/io9.ms, asm/movecpc.ms, asm/movempc.ms, asm/movepcb.ms,
	asm/movepcd.ms, asm/movepcw.ms, asm/moveqpc.ms, asm/moverbpc.ms,
	asm/moverdpc.ms, asm/moverpcb.ms, asm/moverpcw.ms, asm/moverwpc.ms,
	asm/movppc.ms, asm/movrss.ms, asm/movscpc.ms, asm/movsmpc.ms,
	asm/movsrpc.ms, asm/movssr.ms, asm/movucpc.ms, asm/movumpc.ms,
	asm/movurpc.ms, asm/msteppc1.ms, asm/msteppc2.ms, asm/msteppc3.ms,
	asm/rfg.ms, asm/sbfs.ms, asm/subqpc.ms: Likewise.

2010-10-07  Hans-Peter Nilsson  <hp@axis.com>

	* c/seek3.c, c/seek4.c: New tests.

2010-08-24  Hans-Peter Nilsson  <hp@axis.com>

	* asm/nonvcv32.ms: Neutralize changed &&-in-macro gas syntax.

2009-01-18  Hans-Peter Nilsson  <hp@axis.com>

	* asm/opterr5.ms, asm/opterr4.ms,
	asm/opterr3.ms, asm/bare3.ms: New tests.

2009-01-06  Hans-Peter Nilsson  <hp@axis.com>

	* c/mmap5.c, c/mmap6.c, c/mmap7.c,
	c/mmap8.c, c/hellodyn3.c: New tests.

2009-01-03  Hans-Peter Nilsson  <hp@axis.com>

	* c/settls1.c: New test.
	* c/exitg1.c, c/exitg2.c: New tests.
	* c/uname1.c: New test.
	* c/mmap1.c (MMAP_FLAGS): Default-define to
	MAP_PRIVATE and use this macro in the mmap call.
	* c/mmap4.c: New test.
	* c/access1.c: New test.
	* asm/pid1.ms: New test.

2008-12-30  Hans-Peter Nilsson  <hp@axis.com>

	* asm/badarch1.ms: Tweak error message match.

	* asm/badarch1.ms, c/badldso1.c,
	c/badldso2.c, c/badldso3.c,
	c/helloaout.c, c/hellodyn.c,
	c/hellodyn2.c, c/writev1.c,
	c/writev2.c: New tests.
	* c/c.exp: If compiler links libc.so when attempting to
	link dynamically, create symlink named "lib" to the directory
	where it is found.  Handle new test-case option "dynamic".

	* asm/opterr1.ms, asm/opterr2.ms: Adjust for
	differences in getopt_long error message quoting.

2007-11-08  Hans-Peter Nilsson  <hp@axis.com>

	* asm/x0-v10.ms, asm/x0-v32.ms: Tweak
	stack-pointer match pattern for 4K host environment.

2007-10-22  Edgar E. Iglesias <edgar@axis.com>
	    Hans-Peter Nilsson  <hp@axis.com>

	* asm/testutils.inc (test_move_cc): Add missing call to
	test_cc.
	* asm/asr.ms: Correct expected condition code flags.
	* asm/boundr.ms: Ditto.
	* asm/dstep.ms: Ditto.
	* asm/lsr.ms: Ditto.
	* asm/movecr.ms: Ditto.
	* asm/mover.ms: Ditto.
	* asm/neg.ms: Ditto.  Use test_cc, not test_move_cc.
	* asm/op3.ms: Check the condition code flags after the insn
	under test.
	* asm/movecrt10.ms: Update expected number of simulated
	cycles.
	* asm/movecrt32.ms: Ditto.
	* asm/jsr.ms: Don't use local label 8.
	* asm/nonvcv32.ms: New test.

2007-10-11  Jesper Nilsson  <jesper.nilsson@axis.com>

	* c/freopen2.c: Added testcase.

2006-10-02  Hans-Peter Nilsson  <hp@axis.com>
	    Edgar E. Iglesias  <edgar@axis.com>

	* c/clone5.c, c/mprotect1.c,
	c/rtsigprocmask1.c, c/rtsigsuspend1.c,
	c/sig7.c, c/sigreturn1.c,
	c/sigreturn2.c, c/syscall1.c,
	c/syscall2.c, c/sysctl2.c, c/fcntl1.c,
	c/readlink2.c: Add code to print ENOSYS if syscall being
	tested returns ENOSYS.  Add early exit where needed.  Change any
	existing code to print "xyzzy", not "pass".
	* asm/option3.ms, asm/option4.ms,
	c/clone6.c, c/fcntl2.c,
	c/mprotect2.c, c/readlink11.c,
	c/rtsigprocmask2.c, c/rtsigsuspend2.c,
	c/sig13.c, c/sigreturn3.c,
	c/sigreturn4.c, c/syscall3.c,
	c/syscall4.c, c/syscall5.c,
	c/syscall6.c, c/syscall7.c,
	c/syscall8.c, c/sysctl3.c: New tests.

2006-09-30  Hans-Peter Nilsson  <hp@axis.com>

	* c/pipe2.c: Adjust expected output.
	(process): Don't write as much to the pipe as to trig the
	inordinate-amount test in the sim pipe machinery.  Correct test of
	write return-value; check only that pipemax bytes were
	successfully written.  For error-case, emit strerror as well.
	(main): Add a second read.

2006-04-08  Hans-Peter Nilsson  <hp@axis.com>

	* hw/rv-n-cris/irq6.ms: New test.

2006-04-03  Hans-Peter Nilsson  <hp@axis.com>

	* hw: New directory for subdirectories with tests.
	* hw/rv-n-cris: New directory with tests.

2006-04-02  Hans-Peter Nilsson  <hp@axis.com>

	* asm/testutils.inc (test_h_mem): Use register prefix.
	(testr_h_dr, test_h_dr, ldmem_h_gr, mvr_h_mem): Ditto.  Correct
	syntax.

	* asm/x0-v10.ms, asm/x0-v32.ms: Widen regexp for
	stack pointer values.

2006-02-23  Hans-Peter Nilsson  <hp@axis.com>

	* c/time2.c: New test.

2006-01-10  Hans-Peter Nilsson  <hp@axis.com>

	* asm/x1-v10.ms, asm/x3-v10.ms,
	asm/x7-v10.ms: Update expected cycle output.

2005-12-06  Hans-Peter Nilsson  <hp@axis.com>

	* asm/movmp8.ms, asm/pcplus.ms: New tests.
	* asm/movmp.ms: Do not write to P0, P4 or P8.
	* asm/raw13.ms: Write to MOF instead of WZ (P4).

2005-11-21  Hans-Peter Nilsson  <hp@axis.com>

	* asm, c: New directory with C and assembly tests for the CRIS
	simulator.
