TZFILE(5)                     File Formats Manual                    TZFILE(5)

NAME
       tzfile - timezone information

DESCRIPTION
       The timezone information files used by tzset(3) are typically found
       under a directory with a name like /usr/share/zoneinfo.  These files
       use the format described in Internet RFC 8536.  The format begins with
       a 44-byte header containing the following fields:

       * The magic four-byte ASCII sequence "TZif" identifies the file as a
         timezone information file.

       * A byte identifying the version of the file's format (as of 2017,
         either an ASCII NUL, or "2", or "3").

       * Fifteen bytes containing zeros reserved for future use.

       * Six four-byte integer values written in a standard byte order (the
         high-order byte of the value is written first).  These values are, in
         order:

         tzh_ttisgmtcnt
                The number of UT/local indicators stored in the file.

         tzh_ttisstdcnt
                The number of standard/wall indicators stored in the file.

         tzh_leapcnt
                The number of leap seconds for which data entries are stored
                in the file.

         tzh_timecnt
                The number of transition times for which data entries are
                stored in the file.

         tzh_typecnt
                The number of local time types for which data entries are
                stored in the file (must not be zero).

         tzh_charcnt
                The number of bytes of time zone abbreviation strings stored
                in the file.

       The above header is followed by the following fields, whose lengths
       depend on the contents of the header:

       * tzh_timecnt four-byte signed integer values sorted in ascending
         order.  These values are written in standard byte order.  Each is
         used as a transition time (as returned by time(2)) at which the rules
         for computing local time change.

       * tzh_timecnt one-byte unsigned integer values; each one but the last
         tells which of the different types of local time types described in
         the file is associated with the time period starting with the same-
         indexed transition time and continuing up to but not including the
         next transition time.  (The last time type is present only for
         consistency checking with the POSIX-style TZ string described below.)
         These values serve as indices into the next field.

       * tzh_typecnt ttinfo entries, each defined as follows:

              struct ttinfo {
                   int32_t        tt_gmtoff;
                   unsigned char  tt_isdst;
                   unsigned char  tt_abbrind;
              };

         Each structure is written as a four-byte signed integer value for
         tt_gmtoff, in a standard byte order, followed by a one-byte value for
         tt_isdst and a one-byte value for tt_abbrind.  In each structure,
         tt_gmtoff gives the number of seconds to be added to UT, tt_isdst
         tells whether tm_isdst should be set by localtime(3) and tt_abbrind
         serves as an index into the array of time zone abbreviation bytes
         that follow the ttinfo structure(s) in the file.

       * tzh_leapcnt pairs of four-byte values, written in standard byte
         order; the first value of each pair gives the nonnegative time (as
         returned by time(2)) at which a leap second occurs; the second gives
         the total number of leap seconds to be applied during the time period
         starting at the given time.  The pairs of values are sorted in
         ascending order by time.  Each transition is for one leap second,
         either positive or negative; transitions always separated by at least
         28 days minus 1 second.

       * tzh_ttisstdcnt standard/wall indicators, each stored as a one-byte
         value; they tell whether the transition times associated with local
         time types were specified as standard time or wall clock time, and
         are used when a timezone file is used in handling POSIX-style
         timezone environment variables.

       * tzh_ttisgmtcnt UT/local indicators, each stored as a one-byte value;
         they tell whether the transition times associated with local time
         types were specified as UT or local time, and are used when a
         timezone file is used in handling POSIX-style timezone environment
         variables.

       The localtime(3) function uses the first standard-time ttinfo structure
       in the file (or simply the first ttinfo structure in the absence of a
       standard-time structure) if either tzh_timecnt is zero or the time
       argument is less than the first transition time recorded in the file.

   Version 2 format
       For version-2-format timezone files, the above header and data are
       followed by a second header and data, identical in format except that
       eight bytes are used for each transition time or leap second time.
       (Leap second counts remain four bytes.)  After the second header and
       data comes a newline-enclosed, POSIX-TZ-environment-variable-style
       string for use in handling instants after the last transition time
       stored in the file or for all instants if the file has no transitions.
       The POSIX-style TZ string is empty (i.e., nothing between the newlines)
       if there is no POSIX representation for such instants.  If nonempty,
       the POSIX-style TZ string must agree with the local time type after the
       last transition time if present in the eight-byte data; for example,
       given the string "WET0WEST,M3.5.0,M10.5.0/3" then if a last transition
       time is in July, the transition's local time type must specify a
       daylight-saving time abbreviated "WEST" that is one hour east of UT.
       Also, if there is at least one transition, time type 0 is associated
       with the time period from the indefinite past up to but not including
       the earliest transition time.

   Version 3 format
       For version-3-format timezone files, the POSIX-TZ-style string may use
       two minor extensions to the POSIX TZ format, as described in
       newtzset(3).  First, the hours part of its transition times may be
       signed and range from -167 through 167 instead of the POSIX-required
       unsigned values from 0 through 24.  Second, DST is in effect all year
       if it starts January 1 at 00:00 and ends December 31 at 24:00 plus the
       difference between daylight saving and standard time.

   Interoperability considerations
       Future changes to the format may append more data.

       Version 1 files are considered a legacy format and should be avoided,
       as they do not support transition times after the year 2038.  Readers
       that only understand Version 1 must ignore any data that extends beyond
       the calculated end of the version 1 data block.

       Writers should generate a version 3 file if TZ string extensions are
       necessary to accurately model transition times.  Otherwise, version 2
       files should be generated.

       The sequence of time changes defined by the version 1 header and data
       block should be a contiguous subsequence of the time changes defined by
       the version 2+ header and data block, and by the footer.  This
       guideline helps obsolescent version 1 readers agree with current
       readers about timestamps within the contiguous subsequence.  It also
       lets writers not supporting obsolescent readers use a tzh_timecnt of
       zero in the version 1 data block to save space.

       Time zone designations should consist of at least three (3) and no more
       than six (6) ASCII characters from the set of alphanumerics, "-", and
       "+".  This is for compatibility with POSIX requirements for time zone
       abbreviations.

       When reading a version 2 or 3 file, readers should ignore the version 1
       header and data block except for the purpose of skipping over them.

       Readers should calculate the total lengths of the headers and data
       blocks and check that they all fit within the actual file size, as part
       of a validity check for the file.

   Common interoperability issues
       This section documents common problems in reading or writing TZif
       files.  Most of these are problems in generating TZif files for use by
       older readers.  The goals of this section are:

       * to help TZif writers output files that avoid common pitfalls in older
         or buggy TZif readers,

       * to help TZif readers avoid common pitfalls when reading files
         generated by future TZif writers, and

       * to help any future specification authors see what sort of problems
         arise when the TZif format is changed.

       When new versions of the TZif format have been defined, a design goal
       has been that a reader can successfully use a TZif file even if the
       file is of a later TZif version than what the reader was designed for.
       When complete compatibility was not achieved, an attempt was made to
       limit glitches to rarely-used timestamps, and to allow simple partial
       workarounds in writers designed to generate new-version data useful
       even for older-version readers.  This section attempts to document
       these compatibility issues and workarounds, as well as to document
       other common bugs in readers.

       Interoperability problems with TZif include the following:

       * Some readers examine only version 1 data.  As a partial workaround, a
         writer can output as much version 1 data as possible.  However, a
         reader should ignore version 1 data, and should use version 2+ data
         even if the reader's native timestamps have only 32 bits.

       * Some readers designed for version 2 might mishandle timestamps after
         a version 3 file's last transition, because they cannot parse
         extensions to POSIX in the TZ-like string.  As a partial workaround,
         a writer can output more transitions than necessary, so that only
         far-future timestamps are mishandled by version 2 readers.

       * Some readers designed for version 2 do not support permanent daylight
         saving time, e.g., a TZ string "EST5EDT,0/0,J365/25" denoting
         permanent Eastern Daylight Time (-04).  As a partial workaround, a
         writer can substitute standard time for the next time zone east,
         e.g., "AST4" for permanent Atlantic Standard Time (-04).

       * Some readers ignore the footer, and instead predict future timestamps
         from the time type of the last transition.  As a partial workaround,
         a writer can output more transitions than necessary.

       * Some readers do not use time type 0 for timestamps before the first
         transition, in that they infer a time type using a heuristic that
         does not always select time type 0.  As a partial workaround, a
         writer can output a dummy (no-op) first transition at an early time.

       * Some readers mishandle timestamps before the first transition that
         has a timestamp not less than -2**31.  Readers that support only
         32-bit timestamps are likely to be more prone to this problem, for
         example, when they process 64-bit transitions only some of which are
         representable in 32 bits.  As a partial workaround, a writer can
         output a dummy transition at timestamp -2**31.

       * Some readers mishandle a transition if its timestamp has the minimum
         possible signed 64-bit value.  Timestamps less than -2**59 are not
         recommended.

       * Some readers mishandle POSIX-style TZ strings that contain "<" or
         ">".  As a partial workaround, a writer can avoid using "<" or ">"
         for time zone abbreviations containing only alphabetic characters.

       * Many readers mishandle time zone abbreviations that contain non-ASCII
         characters.  These characters are not recommended.

       * Some readers may mishandle time zone abbreviations that contain fewer
         than 3 or more than 6 characters, or that contain ASCII characters
         other than alphanumerics, "-", and "+".  These abbreviations are not
         recommended.

       * Some readers mishandle TZif files that specify daylight-saving time
         UT offsets that are less than the UT offsets for the corresponding
         standard time.  These readers do not support locations like Ireland,
         which uses the equivalent of the POSIX TZ string
         "IST-1GMT0,M10.5.0,M3.5.0/1", observing standard time (IST, +01) in
         summer and daylight saving time (GMT, +00) in winter.  As a partial
         workaround, a writer can output data for the equivalent of the POSIX
         TZ string "GMT0IST,M3.5.0/1,M10.5.0", thus swapping standard and
         daylight saving time.  Although this workaround misidentifies which
         part of the year uses daylight saving time, it records UT offsets and
         time zone abbreviations correctly.

       Some interoperability problems are reader bugs that are listed here
       mostly as warnings to developers of readers.

       * Some readers do not support negative timestamps.  Developers of
         distributed applications should keep this in mind if they need to
         deal with pre-1970 data.

       * Some readers mishandle timestamps before the first transition that
         has a nonnegative timestamp.  Readers that do not support negative
         timestamps are likely to be more prone to this problem.

       * Some readers mishandle time zone abbreviations like "-08" that
         contain "+", "-", or digits.

       * Some readers mishandle UT offsets that are out of the traditional
         range of -12 through +12 hours, and so do not support locations like
         Kiritimati that are outside this range.

       * Some readers mishandle UT offsets in the range [-3599, -1] seconds
         from UT, because they integer-divide the offset by 3600 to get 0 and
         then display the hour part as "+00".

       * Some readers mishandle UT offsets that are not a multiple of one
         hour, or of 15 minutes, or of 1 minute.

SEE ALSO
       time(2), localtime(3), tzset(3), tzselect(8), zdump(8), zic(8).

       Olson A, Eggert P, Murchison K. The Time Zone Information Format
       (TZif).  2019 Feb.  Internet RFC 8536 <https://www.rfc-editor.org/info/
       rfc8536> doi:10.17487/RFC8536 <https://doi.org/10.17487/RFC8536>.

                                                                     TZFILE(5)
