# # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can # be set in this file. More adventurous users can look at local.conf.extended # which contains other examples of configuration which can be placed in this file # but new users likely won't need any of them initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling # the option is a question of removing the # character and making any change to the # variable as required. # # Machine Selection # # You need to select a specific machine to target the build with. There are a selection # of emulated machines available which can boot and run in the QEMU emulator: # #MACHINE ?= "qemuarm" #MACHINE ?= "qemuarm64" #MACHINE ?= "qemumips" #MACHINE ?= "qemumips64" #MACHINE ?= "qemuppc" #MACHINE ?= "qemux86" #MACHINE ?= "qemux86-64" # # There are also the following hardware board target machines included for # demonstration purposes: # #MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # # This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "qemux86-64" # # Where to place downloads # # During a first build the system will download many different source code tarballs # from various upstream projects. This can take a while, particularly if your network # connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you # can preserve this directory to speed up this part of subsequent builds. This directory # is safe to share between multiple builds on the same machine too. # # The default is a downloads directory under TOPDIR which is the build directory. # #DL_DIR ?= "${TOPDIR}/downloads" # # Where to place shared-state files # # BitBake has the capability to accelerate builds based on previously built output. # This is done using "shared state" files which can be thought of as cache objects # and this option determines where those files are placed. # # You can wipe out TMPDIR leaving this directory intact and the build would regenerate # from these files if no changes were made to the configuration. If changes were made # to the configuration, only shared state files where the state was still valid would # be used (done using checksums). # # The default is a sstate-cache directory under TOPDIR. # #SSTATE_DIR ?= "${TOPDIR}/sstate-cache" # # Where to place the build output # # This option specifies where the bulk of the building work should be done and # where BitBake should place its temporary files and output. Keep in mind that # this includes the extraction and compilation of many applications and the toolchain # which can use Gigabytes of hard disk space. # # The default is a tmp directory under TOPDIR. # #TMPDIR = "${TOPDIR}/tmp" # # Default policy config # # The distribution setting controls which policy settings are used as defaults. # The default value is fine for general Yocto project use, at least initially. # Ultimately when creating custom policy, people will likely end up subclassing # these defaults. # DISTRO ?= "poky" # As an example of a subclass there is a "bleeding" edge policy configuration # where many versions are set to the absolute latest code from the upstream # source control systems. This is just mentioned here as an example, its not # useful to most new users. # DISTRO ?= "poky-bleeding" # # Package Management configuration # # This variable lists which packaging formats to enable. Multiple package backends # can be enabled at once and the first item listed in the variable will be used # to generate the root filesystems. # Options are: # - 'package_deb' for debian style deb files # - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) # - 'package_rpm' for rpm style packages # E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" # We default to rpm: PACKAGE_CLASSES ?= "package_rpm" # # SDK target architecture # # This variable specifies the architecture to build SDK items for and means # you can build the SDK packages for architectures other than the machine you are # running the build on (i.e. building i686 packages on an x86_64 host). # Supported values are i686 and x86_64 #SDKMACHINE ?= "i686" # # Extra image configuration defaults # # The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated # images. Some of these options are added to certain image types automatically. The # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) # "src-pkgs" - add -src packages for all installed packages # (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages # (useful if you want to run the package test suites) # "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) # "tools-debug" - add debugging tools (gdb, strace) # "eclipse-debug" - add Eclipse remote debugging support # "tools-profile" - add profiling tools (oprofile, lttng, valgrind) # "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) # "debug-tweaks" - make an image suitable for development # e.g. ssh root access has a blank password # There are other application targets that can be used here too, see # meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. # We default to enabling the debugging tweaks. EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # # Additional image features # # The following is a list of additional classes to use when building images which # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics # - 'image-prelink' in order to prelink the filesystem image USER_CLASSES ?= "buildstats image-prelink" # # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) # after any root filesystems are created and run tests against those images. It can also # run tests against any SDK that are built. To enable this uncomment these lines. # See classes/test{image,sdk}.bbclass for further details. #IMAGE_CLASSES += "testimage testsdk" #TESTIMAGE_AUTO:qemuall = "1" # # Interactive shell configuration # # Under certain circumstances the system may need input from you and to do this it # can launch an interactive shell. It needs to do this since the build is # multithreaded and needs to be able to handle the case where more than one parallel # process may require the user's attention. The default is iterate over the available # terminal types to find one that works. # # Examples of the occasions this may happen are when resolving patches which cannot # be applied, to use the devshell or the kernel menuconfig # # Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none # Note: currently, Konsole support only works for KDE 3.x due to the way # newer Konsole versions behave #OE_TERMINAL = "auto" # By default disable interactive patch resolution (tasks will just fail instead): PATCHRESOLVE = "noop" # # Disk Space Monitoring during the build # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully # shutdown the build. If there is less that 100MB or 1K inodes, perform a hard halt # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necesary to monitor /tmp, if there is no space left the build will fail # with very exotic errors. BB_DISKMON_DIRS ??= "\ STOPTASKS,${TMPDIR},1G,100K \ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ STOPTASKS,/tmp,100M,100K \ HALT,${TMPDIR},100M,1K \ HALT,${DL_DIR},100M,1K \ HALT,${SSTATE_DIR},100M,1K \ HALT,/tmp,10M,1K" # # Shared-state files from other locations # # As mentioned above, shared state files are prebuilt cache data objects which can # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # # This can be a filesystem directory, or a remote url such as http or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. # NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" # # AGL Project SState Mirror # # The AGL Project has prebuilt artefacts available for its releases, you can enable # use of these by uncommenting the following line. This will mean the build uses # the network to check for artefacts at the start of builds, which does slow it down # equally, it will also speed up the builds by not having to build things if they are # present in the cache. It assumes you can download something faster than you can build it # which will depend on your network. # #SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # For AGL: #SSTATE_MIRRORS += "file://.* http://download.automotivelinux.org/sstate-mirror/${AGL_BRANCH}/${DEFAULTTUNE}/PATH;downloadfilename=PATH" # # Qemu configuration # # By default native qemu will build with a builtin VNC server where graphical output can be # seen. The line below enables the SDL UI frontend too. PACKAGECONFIG:append:pn-qemu-system-native = " sdl" # By default libsdl2-native will be built, if you want to use your host's libSDL instead of # the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. #ASSUME_PROVIDED += "libsdl2-native" # You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds # a handy set of menus for controlling the emulator. #PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" # # Parallelism Options # # These two options control how much parallelism BitBake should use. The first # option determines how many tasks bitbake should run in parallel: # #BB_NUMBER_THREADS ?= "4" # # Default to setting automatically based on cpu count #BB_NUMBER_THREADS ?= "${@oe.utils.cpu_count()}" # # The second option controls how many processes make should run in parallel when # running compile tasks: # #PARALLEL_MAKE ?= "-j 4" # # Default to setting automatically based on cpu count #PARALLEL_MAKE ?= "-j ${@oe.utils.cpu_count()}" # # For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would # be appropriate for example. # # Hash Equivalence # # Enable support for automatically running a local hash equivalence server and # instruct bitbake to use a hash equivalence aware signature generator. Hash # equivalence improves reuse of sstate by detecting when a given sstate # artifact can be reused as equivalent, even if the current task hash doesn't # match the one that generated the artifact. # # A shared hash equivalent server can be set with ":" format # # local only #BB_HASHSERVE = "auto" #BB_SIGNATURE_HANDLER = "OEEquivHash" # # online/upstream r/o #AGL_HOST_HASHSERV = "prserv.automotivelinux.org" #BB_SIGNATURE_HANDLER = "OEEquivHash" #BB_HASHSERVE = "${AGL_HOST_HASHSERV}:8484" # The network based PR service host and port # Uncomment the following lines to enable PRservice. # Set PRSERV_HOST to 'localhost:0' to automatically # start local PRService. # Set to other values to use remote PRService. #PRSERV_HOST = "localhost:0" # # r/o upstream prserv #AGL_HOST_PRSERV = "prserv.automotivelinux.org" #PRSERV_HOST = "prserv.automotivelinux.org:8282" # Archive the source and put them to ${DEPLOY_DIR}/sources/. # #INHERIT += "archiver" # # The tarball for the patched source will be created by default, and you # can configure the archiver as follow: # # Create archive for: # 1) original (or unpacked) source: #ARCHIVER_MODE[src] = "original" # 2) patched source: (default) #ARCHIVER_MODE[src] = "patched" # 3) configured source: #ARCHIVER_MODE[src] = "configured" # # 4) the patches between do_unpack and do_patch: #ARCHIVER_MODE[diff] = "1" # set the files that you'd like to exclude from the diff: #ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches" # # 5) the environment data, similar to 'bitbake -e recipe': #ARCHIVER_MODE[dumpdata] = "1" # # 6) the recipe (.bb and .inc): #ARCHIVER_MODE[recipe] = "1" # # 7) Whether output the .src.rpm package: #ARCHIVER_MODE[srpm] = "1" # # 8) Filter the license, the recipe whose license in # COPYLEFT_LICENSE_INCLUDE will be included, and in # COPYLEFT_LICENSE_EXCLUDE will be excluded. #COPYLEFT_LICENSE_INCLUDE = 'GPL* LGPL*' #COPYLEFT_LICENSE_EXCLUDE = 'CLOSED Proprietary' # # 9) Config the recipe type that will be archived, the type can be # target, native, nativesdk, cross, crosssdk and cross-canadian, # you can set one or more types. Archive all types by default. #COPYLEFT_RECIPE_TYPES = 'target' # # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. CONF_VERSION = "2" # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/base/00_local.conf.agl.inc # # AGL global configuration options #--------------------------------- # Set DISTRO for AGL DISTRO = "poky-agl" #see meta-agl/meta-agl-profile-core/conf/include/base-agl.inc require conf/include/base-agl.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl-demo/templates/feature/agl-demo/50_local.conf.inc # #see meta-agl-demo/conf/include/agl-demo.inc require conf/include/agl-demo.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl-devel/templates/feature/agl-flutter/50_local.conf.inc # # Include Flutter SDK in SDK TOOLCHAIN_HOST_TASK:append = " nativesdk-flutter-sdk" # Include agl-specific defaults require conf/include/agl-flutter.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-app-framework/50_local.conf.inc # #see meta-agl/meta-app-framework/conf/include/agl-app-framework.inc require conf/include/agl-app-framework.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-buildstats/50_local.conf.inc # INHERIT += "buildstats" INHERIT += "buildstats-summary" # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-create-spdx/50_local.conf.inc # #see meta-agl/meta-agl/conf/include/agl-devel.inc require conf/include/agl-create-spdx.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-devel/50_local.conf.inc # #see meta-agl/meta-agl/conf/include/agl-devel.inc require conf/include/agl-devel.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-netboot/50_local.conf.inc # #see meta-agl/meta-netboot/conf/include/agl-netboot.inc require conf/include/agl-netboot.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-package-management/50_local.conf.inc # #see meta-agl/meta-agl/conf/include/agl-package-management.inc require conf/include/agl-package-management.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-pipewire/50_local.conf.inc # #see meta-agl-devel/meta-pipewire/conf/include/agl-pipewire.inc require conf/include/agl-pipewire.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-selinux/50_local.conf.inc # #see meta-agl/meta-agl/conf/include/agl-selinux.inc require conf/include/agl-selinux.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-weston-remoting/50_local.conf.inc # DISTRO_FEATURES:append = " weston-remoting" # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/./meta-agl/templates/machine/qemuarm/50_local.conf.inc # MACHINE = "qemuarm" #see meta-agl/meta-agl-bsp/conf/include/agl_qemux86-64.inc require conf/include/agl_qemuarm.inc # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-ptest/90_local.conf.inc # # Enabling ptest in image ... OVERRIDES:append = ":agl-ptest" DISTRO_FEATURES:append = " ptest" EXTRA_IMAGE_FEATURES:append = " ptest-pkgs" IMAGE_INSTALL:append = " lua-ptest xmlsec1-ptest libxml2-ptest" # / ptest # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/base/99_local.conf.inc # ######################## # AGL DISTRO VARIABLES # ######################## # ARM 32bit 'medium' compiler (armv7thf instead of armv7ve) # (only use for CPUs <= cortex-a9 / w/o virt extension - e.g. cortex-a8) # AGL_FEATURES:append = " agl-medium-arm-compiler" ###################### # AGL USER VARIABLES # ###################### # Add additional IMAGE_FSTYPES here on-top of the default ext4.xz and tar.xz #AGL_EXTRA_IMAGE_FSTYPES = "" # Additional free disk space created in the image in Kbytes. #IMAGE_ROOTFS_EXTRA_SPACE="524288" # meta-agl/meta-agl-profile-graphical/recipes-graphics/wayland/weston-init.bbappend # AGL's compositor is started instead of weston like so # AGL_DEFAULT_WESTONSTART ?= "/usr/bin/agl-compositor --config ${sysconfdir}/xdg/weston/weston.ini" # you can redefine it using this variable to go back to weston, # but be careful that this needs further changes to work ! # Especially the AGL demo apps will not work as-is. #AGL_DEFAULT_WESTONSTART = "/usr/bin/weston" # meta-agl-profile-graphical-qt5/recipes-qt/qt5/qtwayland_%.bbappend # This defines the QT integration. We default to xdg-shell # AGL_DEFAULT_WM_SHELL ?= "xdg-shell" # you can redefine it using this variable to e.g. use ivi-shell # but be careful that this needs further changes to work ! #AGL_DEFAULT_WM_SHELL = "" # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/templates/feature/agl-ci/99_local.conf.inc # AGL_FEATURES:append = " AGLCI" # opencv seems to have a parallel make bug # ...contrib/modules/xfeatures2d/test/test_features2d.cpp:51:10: fatal error: features2d/test/test_detectors_regression.impl.hpp: No such file or directory PARALLEL_MAKE:pn-opencv = "-j 1" AGL_HOST_PREMIRROR ?= "http://download.automotivelinux.org" AGL_HOST_SSTATE_MIRROR ?= "http://download.automotivelinux.org" PREMIRRORS = " \ git://.*/.* ${AGL_HOST_PREMIRROR}/AGL/mirror/ \n \ ftp://.*/.* ${AGL_HOST_PREMIRROR}/AGL/mirror/ \n \ http://.*/.* ${AGL_HOST_PREMIRROR}/AGL/mirror/ \n \ https://.*/.* ${AGL_HOST_PREMIRROR}/AGL/mirror/ \n \ " SSTATE_MIRRORS = " file://.* ${AGL_HOST_SSTATE_MIRROR}/sstate-mirror/${AGL_BRANCH}/${DEFAULTTUNE}/PATH;downloadfilename=PATH \n " #INHERIT += "packagefeed-stability" INHERIT += "buildhistory" INHERIT += "buildstats" INHERIT += "buildstats-summary" # setup for PRSERV and HASHSERV #AGL_HOST_PRSERV ?= "10.30.72.18" #AGL_HOST_HASHSERV ?= "10.30.72.18" # r/w hashserv #BB_HASHSERVE = "${AGL_HOST_HASHSERV}:8383" #BB_SIGNATURE_HANDLER = "OEEquivHash" # r/w prserv #PRSERV_HOST = "${AGL_HOST_PRSERV}:8181" IMAGE_INSTALL:append = " curl" # disable lttng due to build errors LTTNGMODULES:forcevariable = "" LTTNGTOOLS:forcevariable = "" # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # fragment { # /dev/stdin # # generated by /w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/scripts/.aglsetup_genconfig.bash DISTRO_SETUP_MANIFEST = "/w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/build-qemuarm/aglsetup.manifest" DISTRO_MANIFEST_GENERATOR = "/w/workspace/sandbox-build-machines-sstate-mirror/AGLBRANCH/quillback/MACHINE/qemuarm/label/agl-test-slave/sstate-build/meta-agl/scripts/distro-manifest-generator.sh" # # } # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # IMAGE_FEATURES:remove = "tools-profile"